Filter
Top Products
C100_110-160_180.FB 22 Tue Jul 16 06:36:50 1996
22
Installing Option Boards
4 In the desired option slot, turn the blank plate’s locking knob counter-clockwise
to unlock the plate, as shown in Figure 11.
NOTE: The new main tray assembly contains a blank plate which is held in by a locking
knob. Be sure to remove these components before attempting to install the option
boards.
Figure 11 Removing a Blank Plate
5 Remove the blank plate from the slot, as shown in Figure 11.
Locking Knob
Blank Plate
EISA Slider