Filter
Top Products
C100_110-160_180.FB 26 Tue Jul 16 06:36:50 1996
26
Installing the New Main Tray Assembly
Installing the New Main Tray Assembly
Install the new C160/C180 main tray assembly, as described in the following
procedure:
1 Align the main tray assembly with the chassis and slide it into place, as shown in
Figure 15.
Figure 15 Installing the New Main Tray Assembly
2 Slide the main tray in until you feel it make contact with the internal connectors.
3 Push firmly and evenly on the main tray assembly to make sure that all connec-
tors are fully seated.
4 Start all four thumb screws loosely, then tighten them firmly. See Figure 15.
NOTICE: To maintain regulatory agency compliance, verify that the main tray is
fully seated and all four thumb screws are completely tightened.
Thumb Screws
Thumb
Screws