Filter
Top Products
C100_110-160_180.FB 31 Tue Jul 16 06:36:50 1996
31
Installing the New Main Tray Assembly
15 At the prompt, enter the following command to enter the configuration menu:
co
16 Configure the console path for the built-in graphics with the following syntax:
mo graphics(0)
17 Power off the system.
18 Power on the system.
After you install a new CPU board or I/O board and boot the system for the first
time, you are prompted for the LAN ID. Enter the LAN ID you recorded in the
beginning of this document.
Skip to step 25.
19 Power on the monitor, any peripheral devices, and the system unit.
20 If a message to press Esc to stop the boot process is displayed, then press Esc.
This stops the boot process and brings you to the Boot Console Handler prompt.
21 At the prompt, enter the following command to enter the configuration menu:
co
22 Configure the console path for your graphics adapter with the following syntax:
mo graphics(n)
where graphics(n) is the graphics path that you recorded earlier.
23 Power off the system.
24 Power on the system.
After you install a new CPU board or I/O board and boot the system for the first
time, you are prompted for the LAN ID. Enter the LAN ID you recorded in the
beginning of this document.
25 Pack the old main tray in the packaging from the upgrade kit and use the docu-
mentation provided to return it to Hewlett-Packard.