HP (Hewlett-Packard) C1C95UT#ABA Laptop User Manual


 
Optical drive
NOTE: The optical drive spare part kit includes an optical drive bezel and optical drive bracket.
Description Spare part number
For use only on HP EliteBook 8470w Mobile Workstation computer models:
Blu-ray R/RE DVD±RW SuperMulti DL Drive 686048-001
Blu-ray ROM DVD±RW SuperMulti DL Drive 689090-001
DVD±RW Double-Layer with SuperMulti Drive 689078-001
DVD-ROM Drive 689076-001
For use only on HP EliteBook 8470p Notebook PC computer models:
Blu-ray ROM DVD±RW SuperMulti DL Drive 689079-001
DVD±RW Double-Layer with SuperMulti Drive 689077-001
DVD-ROM Drive 689075-001
Before removing the optical drive, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
Battery on page 57).
5. Remove the service cover (see
Service cover on page 59).
Remove the optical drive:
1. Position the computer upside-down with the right side toward you.
2. Loosen the captive Phillips screw (1) that secures the optical drive to the computer.
3. Use a flat-blade screw driver or similar tool to press on the optical drive bracket tab (2) to release
the optical drive.
Component replacement procedures
61