Filter
Top Products
HP BladeSystem Power
HP BladeSystem PowerHP BladeSystem Power
HP BladeSystem Power
Sizer
SizerSizer
Sizer
The HP BladeSystem Power Sizer helps in sizing the power infrastructure needed for a HP BladeSystem
solution. This sizer enables effective planning for the power consumption and heat load of the
BladeSystem at its site.
The sizer enables you to:
Select the type and number of components within each Blade Server and Blade Enclosure.
View the effect of component changes on the power consumption and heat loading.
Review server loading and determine power supply and power subsystem requirements.
Approximate electrical and heat load for facilities planning purposes.
The sizing estimate is based on component level power measurements for a system stressed to maximum
capability.
Values obtained from the BladeSystem Sizer tool are measured with all components stressed to 100%
load and are intended for facilities planning purposes only. Actual power consumption varies with
application type, application utilization, and ambient temperature.
The p-class BladeSystem and the c-Class BladeSystem solutions are supported in the BladeSystem Power
Sizer.
Available at:
http://www.hp.com/go/bladesystem/powercalculator
Service and Support
Service and SupportService and Support
Service and Support
HP Care Pack services provide total care and support expertise with committed response designed to
meet your IT and business needs.
The HP Care Pack service for HP ProLiant BL c-Class server blades, cover the server blade and all HP
branded hardware options qualified for the server, purchased at the same time or afterwards, internal to
the server.
HP Care Pack services for the c7000 and c3000 enclosures cover the enclosure, power supplies and
fans. HP qualified rack options are covered by these services when installed within the same rack. HP
supported c-Class enclosure devices including pass thru, Ethernet interconnect and virtual connect
modules are also covered by the c7000 and c3000 enclosure Care Pack services.
NOTE:
NOTE: NOTE:
NOTE:
SAN/Fabric switches for the HP c-Class BladeSystem are not covered under the c7000 and
c3000 enclosure Care Packs, SAN/Fabric switches carry separate Care Packs. SAN/Fabric Switch Care
Pack service level support should always be uplifted to match existing storage or server service level.
To fully capitalize on your HP BladeSystem servers' capabilities requires a service partner who thoroughly
understands your server technology and systems environment. HP Services, an industry leader in
provision of multi vender support solutions provides a range of support services designed to meet the
varying needs of business. Whether an SMB or large global corporation HP has a HP BadeSystem server
support offer to help you speedily deploy and maximize system uptime.
Recommended Service
Recommended ServiceRecommended Service
Recommended Service
–
––
–
Simplify ProLiant solution implementation, maintenance and management.
Support Service
Support ServiceSupport Service
Support Service
–
––
–
4-Hour Response Coverage, 3-Year, 24 x 7, Same Business Day
Deployment Service
Deployment Service Deployment Service
Deployment Service
–
––
–
Installation and Start Up for HP BladeSystem Infrastructure
Enhanced Service
Enhanced ServiceEnhanced Service
Enhanced Service
–
––
–
Optimize service level to increase IT performance and availability
Support Service
Support ServiceSupport Service
Support Service
–
––
–
HP Proactive BladeSystem Service, 1-Year
QuickSpecs
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c-Class Overview
DA - 12790 Worldwide — Version 12 — July 14, 2008
Page 12