Filter
Top Products
HP NC512m Dual Port 10GbE Multifunction BL-c Adapter
NOTE:
NOTE:NOTE:
NOTE:
An NC512m network adapter card is required for each server blade
connecting to the HP 10Gb Ethernet BL-c Switch
NOTE:
NOTE: NOTE:
NOTE:
Two NC512m adapters are supported per ProLiant c-Class full height server in
type II x8 PCI Express mezzanine slots and one adapter per a type II x8 PCI Express
mezzanine slot in a half height server. For more information, see the Mezzanine Slot
Compatibility matrix within the HP NC512m Dual Port 10GbE Multifunction BL-c
Adapter QuickSpecs:
http://h18004.www1.hp.com/products/servers/networking/nc512m/index.html
.
NOTE:
NOTE:NOTE:
NOTE:
The NC512m requires a minimum of 2 GB of server memory per NC512m
card and supports a maximum of 32 GB for Windows and 64 GB for Linux. NOTE:
Each port on the NC512m transmits from the server only at 20 Gbps full duplex per
port.
440910-B21
HP BladeSystem
HP BladeSystemHP BladeSystem
HP BladeSystem
c-Class FC SAN
c-Class FC SANc-Class FC SAN
c-Class FC SAN
Interconnects
InterconnectsInterconnects
Interconnects
HP 4Gb Virtual Connect Fibre Channel Module for c-Class BladeSystem
409513-B21
16 port FC Pass-thru Module for c-Class BladeSystem
403626-B21
HP 8/12c SAN Switch c-Class BladeSystem
AJ820A
HP 8/24c SAN Switch c-Class BladeSystem
AJ821A
HP 8/24c SAN Switch Power Pack c-Class Enclosure
AJ822A
HP 8/12c Switch 12-pt c-Class Upgrade LTU
T5517A
HP Brocade 4/12 SAN Switch
AE370A
HP Brocade 4/24 SAN Switch Power Pack
AE371A
HP Brocade 4/24 SAN Switch
AE372A
HP Brocade 4/12 SAN Switch Upgrade LTU
AE373A
Cisco MDS 9124e 12 port Fabric Switch
AG641A
HP BladeSystem
HP BladeSystemHP BladeSystem
HP BladeSystem
InfiniBand Interconnects
InfiniBand InterconnectsInfiniBand Interconnects
InfiniBand Interconnects
HP 4X DDR IB Switch Module for HP c-Class BladeSystem
410398-B21
Step 4: Select rack power distribution for installing the enclosure into a rack.
Step 4: Select rack power distribution for installing the enclosure into a rack.Step 4: Select rack power distribution for installing the enclosure into a rack.
Step 4: Select rack power distribution for installing the enclosure into a rack.
NOTE:
NOTE:NOTE:
NOTE:
For use with the c3000 rack-able model only.
NOTE:
NOTE: NOTE:
NOTE:
A pair of PDUs must be ordered for AC Feed redundancy. If AC redundancy is not required, a single PDU or UPS may be
acceptable.
HP Monitored Power
HP Monitored PowerHP Monitored Power
HP Monitored Power
Distribution Unit
Distribution UnitDistribution Unit
Distribution Unit
HP 8.6 kVA Monitored PDU, 30A (NA/JPN)
AF504A
HP 11 kVA Monitored PDU 16A (INTL)
AF508A
HP Modular Power
HP Modular PowerHP Modular Power
HP Modular Power
Distribution Unit
Distribution UnitDistribution Unit
Distribution Unit
HP 8.3kVA Modular Distribution Unit 40 Amp (NA/JPN)
252663-D73
HP 8.3kVA Modular Distribution Unit 40 Amp (Intl)
252663-B32
HP 7.3kVA Modular Distribution Unit 32 Amp (Intl)
252663-B31
HP 4.9kVA Modular Distribution Unit 24 Amp (NA/JPN)
252663-D72
HP Two C-13 PDU Extension Bars
AF500A
Uninterruptible Power
Uninterruptible PowerUninterruptible Power
Uninterruptible Power
Systems - Rack Mountable
Systems - Rack MountableSystems - Rack Mountable
Systems - Rack Mountable
HP rack-mountable R5500 UPS (5000VA / 4500 watts)
NOTE:
NOTE:NOTE:
NOTE:
The R5500 includes four c-13 PDU Extension bars.
NOTE:
NOTE:NOTE:
NOTE:
The R5500 supports 4 power supplies in the Power Supply Redundant (N+1)
power mode
AF426A
HP Rack to Tower 5500 Conversion Kit
AF442A
QuickSpecs
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
Configuration Information Factory Integrated Models
DA - 12790 Worldwide — Version 12 — July 14, 2008
Page 16