Filter
Top Products
OfficeJet T65
HP Parts Reference Guide™
www.h
p
.com/
g
o/h
pp
arts
Print Mechanism Parts
Panel
268
C5374-40047 Paper tray right outer panel (Right tray cap)
C5374-60002 New Part for C5374-40047
269
C5374-40048 Paper tray left outer panel (Left tray cap)
Paper Stacker
270
C4557-40016 Kicker - Restacks paper in stack after top sheet is picked
Pin
273
C4557-40085 Link pin - Small plastic piece
C6429-60025 New Part for C4557-40085
274
C5870-40029 Separator peg
Plate
275
C6409-40028 Belt Attachment Plate - Mounted to back of Ink Cartridge Carriage Assembly - Used to attach the Carriage Drive Belt
Print Mechanism
276
C5374-60002 Print mechanism assembly - Complete mechanism with carriage movement, paper picking and service station
operations
NO LONGER SUPPLIED
Retainer
277
C4557-20026 Felt retainer - Holds the lubricating felt to the side of the carriage
Rod
278
C6409-20004 Carriage rod - Shaft that the carriage assembly rides on - This item should be replaced only by trained, experienced
service personnel
Roller
279
C4557-20002 Pinch roller - Provides downward pressure on media as it passes by upper paper guide
280
C4557-40015 Rear roller (Black) - Between paper and rear paper guide
NO LONGER SUPPLIED
281
C4557-60025 Pivot feed roller - Shaft with 4 hard rollers - Does not include other items such as gear or encoder
282
C5870-40030 Postscan roller - Shaft with 2 rollers - Mounts on underside of the lower ADF chassis
283
C6409-60037 Pivot feed roller assembly - Shaft with small rollers and paper encoder - This item should be replaced only by trained,
experienced service personnel
Separator
284
C4557-60011 Separator pad
Shaft
285
C4557-20027 Cartridge latch shaft near top of carriage - Used to hold cartridge latches in place
Shield
286
C4557-00038 Paper motor ESD shield
Shift Plate
C6455-60057 Shift plate assembly - Five plastic gears held in a two piece plastic frame - Attaches to feedroller assembly
Slide
288
C5870-40036 Integrated slider for carriage assembly
Snap
289
C4557-40150 Pivot snap - Used to hold pivot to pick feed roller shaft
Spring
290
C2145-00033 ESD spring between ESD blade and carriage PCA
291
C4557-00009 Separator spring - Provides pressure between separator assembly and the center drive roller
292
C4557-00011 Drawer spring - Holds input drawer in place
293
C4557-00017 Belt tension spring - Provides tension for carriage belt
© 2004 Hewlett-Packard 12