Filter
Top Products
OfficeJet T65
HP Parts Reference Guide™
www.h
p
.com/
g
o/h
pp
arts
Other Accessories
Cartridge
138
C1823T Tri-color ink cartridges (2 pack of C1823D) - Each prints approximately 360 pages on 13.5% total density (4.5% for each
color) on a 8 inch by 10 inch print area (for USA)
139
C1823TA Tri-color ink cartridges (2 pack of C1823D) - Each prints approximately 360 pages on 13.5% total density (4.5% for each
color) on a 8 inch by 10 inch print area (for Asia/Pacific)
140
C1823TE Tri-color ink cartridges (2 pack of C1823D) - Each prints approximately 360 pages on 13.5% total density (4.5% for each
color) on a 8 inch by 10 inch print area (for Europe)
141
C1823TL Tri-color ink cartridges (2 pack of C1823D) - Each prints approximately 360 pages on 13.5% total density (4.5% for each
color) on a 8 inch by 10 inch print area (for Latin America)
142
C6613AN Black print cartridges (High capacity) - (2 pack of 51645A) each prints approximately 840 pages based on 5% density on
a 8 inch (20.3cm) by 10 inch (25.4cm) print area (for USA)
NO LONGER SUPPLIED
143
C6618AN Tri-color ink cartridges (2 pack of C1823D) - Each prints approximately 360 pages on 13.5% total density (4.5% for each
color) on a 8 inch (20.3cm) by 10 inch (25.4cm) print area (for USA)
NO LONGER SUPPLIED
Return Kit
5183-5268 Return kit with box and instructions - For returning defective Thermal InkJet (TIJ) 2.5 InkJet cartridges covered under the
CREW program - For USA
5184-2833 Return kit with box and instructions - For returning defective Thermal InkJet (TIJ) 2.5 InkJet cartridges covered under the
CREW program - For use outside of the USA
Sleeve
C5316-80011 Document carrier sleeve - 2 full size and 2 half size sleeves - Sleeve sealed on three sides
C5374-80031 Document carrier sleeve - Full size, sealed on one side
Other Internal Parts
Brace
149
C4557-40128 Left bacKBone brace - Provides support for bacKBone
150
C4557-40130 Left wall brace - Provides support for left wall
Clip
151
C5374-00033 LIU clip
Extender
152
C5374-00022 Base extender - Metal item used to connect logic PC board ground plane to print mechanism chassis
Ferrite Assembly
153
9170-1655 Ferrite core
Flag
154
C5374-40068 Pen door flag - Attached to sensor PC board - Used to detect an open cartridge access door
Frame
155
C5870-40039 Wing frame - Chassis for in/out tray components
Ground Strap
156
C5374-00052 Ground strap - Connects the logic PC board ground plane to the ADF mechanism
Paper Tray Parts
Cam
222
C4557-40034 Drawer cam - Short, spring loaded lever attached to the base of the wing frame - Used to draw input tray into position
Guide
223
C5870-40037 Length adjuster - Media input length adjuster
NO LONGER SUPPLIED
224
C6410-60006 Width adjust assembly (Purple) - Holds media against right wall of input tray - Includes left wall pusher, both springs,
width adjust, and width adjust channel
© 2004 Hewlett-Packard 7