Filter
Top Products
Hard drive extension board (4540s models only)
Description Spare part number
Hard drive extension board 683487-001
Before removing the hard drive extension board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 55).
5. Remove the following components:
a. Bottom door (see
Bottom door on page 58).
b. Hard drive (see
Hard drive on page 62)
c. Optical drive (see
Optical drive on page 60)
d. WLAN/Bluetooth module (see
WLAN/Bluetooth combo card on page 68)
e. WWAN module (see
WWAN module on page 66)
f. Keyboard (see
Keyboard on page 70)
g. Heat shield (see
Heat shield on page 73)
h. Fan (see
Fan on page 75)
i. Heat sink (see
Heat sink on page 77)
j. Top cover (see
Top cover on page 82)
k. System board (see
System board on page 99)
Remove the hard drive extension board:
1. Lift the right side of the system board up.
Component replacement procedures 107