Filter
Top Products
4. When the software prompts you, connect the USB cable to the computer and the product.
5. When the installation is complete, print a page from any program to make sure that the printing
software is correctly installed.
Connect the product to a network
Supported network protocols
To connect a networking-equipped product to a network, you need a network that uses one or more
of the following protocols.
● TCP/IP (IPv4 or IPv6)
NOTE: While this product can be used over IPv6 networks, a product software installation from
the CD is not supported over IPv6 networks.
●
LPD Printing
● SLP
●
WS-Discovery
●
HP Wireless Direct
Install the product on a wired network
Use this procedure to install the product on a wired network.
30 Chapter 3 Connect the product ENWW