Filter
Top Products
13.
Release the top cover by lifting the front edge until it disengages from the base enclosure.
Reverse this procedure to install the top cover.
Display assembly
Description Spare part number
25.7-cm (10.1-in) display assembly (includes display panel cable, 2 WLAN transceivers and cables, 2 WWAN transceivers
and cables (select models only), and webcam/microphone module and cable):
●
WSVGA, AntiGlare, LED display assembly in black for use only on Compaq Mini CQ10 LTE
computer models
638150-001
●
WSVGA, anti-glare, LED display assembly in black for use only on Compaq-branded models 634493-001
●
WSVGA, anti-glare, LED display assembly in black for use only on HP-branded models 633496-001
●
WSVGA, anti-glare, LED display assembly in red 633498-001
●
WSVGA, anti-glare, LED display assembly in blue 633499-001
●
WSVGA, anti-glare, LED display assembly in white 633497-001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the following components:
a. Battery (see
Battery on page 40).
b. Service access cover (see
Service access cover on page 43).
c. Keyboard (see
Keyboard on page 55).
d. Top cover (see
Top cover on page 58).
Component replacement procedures
61