Filter
Top Products
5.
Disconnect the WWAN antenna cables from the WWAN module (see
WWAN and GPS modules
(select models only) on page 48).
6. Disconnect the WLAN antenna cables from the WLAN module (see
WLAN module on page 50).
Remove the display assembly:
1. Close the computer.
2. Turn the computer upside down, with the front toward you.
3.
Release the WLAN antenna cables (1) from the clips (2) built into the base enclosure.
4. Turn the computer right-side up, with the front toward you.
5.
Open the computer as far as possible.
6. Disconnect the display panel cable (1) from the system board.
62 Chapter 4 Removal and replacement procedures