Filter
Top Products
Removal and replacement procedures 32
To remove the component:
1.
Power down the server (on page 25).
2.
Extend or remove the server from the rack ("Extend the server from the rack" on page 25, "Remove
the server from the rack" on page 26).
3.
Remove the access panel ("Access panel" on page 30).
4.
Remove the air baffle ("Air baffle" on page 31).
5.
Remove the fan module.
To replace the component, reverse the removal procedure.
IMPORTANT: After installing the fan module, firmly press the top of the module connectors to
ensure the connectors are seated properly.
Battery tray
To remove the component:
1.
Power down the server (on page 25).
2.
Extend or remove the server from the rack ("Extend the server from the rack" on page 25, "Remove
the server from the rack" on page 26).
3.
Remove the access panel ("Access panel" on page 30).
4.
Remove the air baffle ("Air baffle" on page 31).
5.
Remove fan module 2 ("Fan module" on page 31).
6.
Remove the battery tray.