Filter
Top Products
Removal and replacement procedures 42
6.
Disconnect the backplane power cable from the system board.
7.
Turn the quarter-turn fasteners and lift the integrated array controller away from the system board.
To replace the component, reverse the removal procedure.
DIMMs
To remove the component:
1.
Power down the server (on page 25).
2.
Extend the server from the rack (on page 25).
3.
Remove the access panel ("Access panel" on page 30).
4.
Remove the air baffle ("Air baffle" on page 31).
5.
Open the DIMM slot latches.