Filter
Top Products
Removal and replacement procedures
Maintenance and Service Guide 4–39
13. If it is necessary to replace the display inverter:
a. Release the display inverter 1 as far from the display bezel as the backlight cables and display panel
cable allow.
b. Disconnect the two backlight cables 2 and the display panel cable 3 from the display inverter, and remove
the display inverter. The display inverter is available using spare part number 498324-001.
14. If it is necessary to replace the display hinges:
a. Remove the two Phillips PM2.0×4.0 screws 1 that secure the display hinge bracket to the display bezel.
b. Remove the display hinge bracket 2.