HP (Hewlett-Packard) dx7300 Personal Computer User Manual


 
QuickSpecs
HP Compaq dx7300 Business PC
Technical Specifications
DA – 12583 EMEA Version 1 • September 18, 2006 Page 15
Dual-State Power Button Power button acts as both an on/off button and suspend-to-sleep button
Serviceability Features of System
Dual Color Power LED on Front of Computer (Indicates Normal Operations and Fault Conditions)
Diagnostic LED Explanation Table Number of 1-second red LED blinks followed by 2-second pause, then repeats:
2-processor thermal protection activated
3-processor not installed
4-power supply failure
5-memory error
6-video error
7-PCA failure (ROM detected failure prior to video)
8-invalid ROM, bootblock recover mode
System/Emergency ROM Flash ROM CMOS Battery Holder for easy
Replacement
Flash Recovery with Video
Configuration Record SW
5 Aux Power LED on System
PCA
Processor ZIF Socket for easy Upgrade
Over-Temp Warning on Screen
(Requires IM Agents)
Clear Password Jumper DIMM Connectors for easy Upgrade
HP Backup and Recovery
Manager
Clear CMOS Button NIC LEDs (integrated) (Green & Amber)
Serviceability Features of Chassis
Dual Color Power and HD LED
To Indicate Normal
Operations and Fault
Conditions
Color coordinated cables and
connectors
Tool-less Hood Removal
Front power switch System memory can be
upgraded without removing the
system board or any internal
components
Tool-less Hard Drive, CD & Diskette
Removal
Green Pull Tabs, and Quick
Release Latches for easy
Identification
Tool-less System Board Removal
Feature Description
ASF 2.0 support (Alert Standard
Format)
Industry-standard specification for network alerting in operating system-absent
environments
Drive Lock*
Implementation of the industry standard ATA Security feature set. When enabled, it
prevents software access to user data on the drive until one or two user-defined