Filter
Top Products
3.
Remove the keyboard shield (3).
CAUTION: When removing the keyboard shield, make sure the keyboard cable and backlight
cable are not damaged when being released through the opening in the keyboard shield.
The keyboard shield is available using spare part number .
4. Partially open the computer.
5. Insert a thin tool into the keyboard release hole in the memory module compartment, and then
press on the back of the keyboard until the keyboard disengages from the computer.
6. Turn the computer right-side up with the front toward you.
7. Remove the two Phillips PM2.0×2.9 screws (1) that secure the keyboard to the top cover.
8. Release the keyboard (2) by sliding it toward the TouchPad.
Component replacement procedures
97