Filter
Top Products
Remove the hard drive bracket:
1. Remove the 4 PM2.0×3.0 screws (1) on the hard drive bracket.
2. Remove the hard drive brackets (2) from the hard drive.
Reverse these procedures to reassemble and install the hard drive.
Solid state drive (Intel models only)
Description Spare part number
Solid state drive 24-GB 727598-001
Solid state drive 128-GB 727514-001
Before removing the SSD, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the service cover (see
Service cover on page 30).
5. Remove the battery (see
Battery on page 32).
Remove the solid-state drive:
1. Remove the Phillips PM2.0×2.0 screw (1) that secures the solid-state drive to the computer. The
drive tilts upwards.
Component replacement procedures
35