Filter
Top Products
4. Lift the computer up to an angle (4), and then pull the display assembly away from the computer
(5).
5. Remove the 2 screw covers (1) and the 2 PhillipsPM 2.0×2.5 screws (2) from the bottom corners
of the bezel.
6. Loosen the top edge of the plastic bezel cover (3) from all four sides of the display panel.
7. Loosen the left and right side edges of the plastic bezel cover (4), and then loosen the bottom
edge of the plastic bezel cover (5). Remove the plastic bezel cover (6).
NOTE: There is also adhesive that secures the bottom of the bezel to the display.
The display bezel is available using spare part number 725442-001.
Component replacement procedures
59