Filter
Top Products
Base enclosure
Description Spare part number
For use only on HP ENVY TouchSmart m7 Notebook PC computer models 720226-001
Base enclosure for use only on HP ENVY TouchSmart 17 Notebook PC computer models with Leap
Motion capability
736476-001
Base enclosure for use only on HP ENVY TouchSmart 17 Notebook PC computer models without
Leap Motion capability
736475-001
Base enclosure for use only on computer models equipped with a non-TouchScreen display
assembly
720225-001
Rubber Feet Kit:
For use on HP ENVY TouchSmart m7 Notebook PC computer models 720259-001
For use on HP ENVY TouchSmart 17 Notebook PC computer models and computer models
equipped with a non-TouchScreen display assembly
720258-001
Before disassembling the computer, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 46).
5. Remove the service cover (see
Service cover on page 47).
6. Remove the hard drive (see
Hard drive on page 48).
7. Remove the memory modules (see
Memory modules on page 51).
8. Remove the WLAN module (see
WLAN module on page 52).
9. Remove the optical drive (see
Optical drive on page 55).
64 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts