Filter
Top Products
Chapter 1 13
Installation and Setup
Turning on the Analyzer for the First Time
Turning on the Analyzer for the First Time
❏ Plug in the power cord.
WARNING If this product is to be energized via an external auto transformer for
voltage reduction, make sure that its common terminal is connected to a
neutral (earthed pole) of the power supply.
CAUTION The analyzer is shipped with a a transportation disk inserted in the disk
drive to prevent damage to the disk drive during transportation. This
transportation disk, or a blank floppy disk, should be inserted in the disk
drive whenever transporting the analyzer.
Do not leave a disk in the front-panel disk drive while turning the analyzer
on. Also, ensure that the transportation disk is removed from the drive.
NOTE Do not connect anything else to the analyzer yet.
❏ Press the power switch (located in the lower left-hand corner of the analyzer’s front
panel) to turn the analyzer on. See “Front Panel Overview” on page 22.
NOTE The instrument requires >2 minutes to power-on.
Information Screen
An information screen appears during the initialization process. The information screen
contains the analyzer product number and a URL for accessing product support
information on the World Wide Web. See “Additional Information” on page 2.
NOTE The information screen displays for approximately 10 seconds before the
initialization process is complete.
Record the firmware revision and serial number, and keep it for reference. If
you should ever need to call Agilent Technologies for service or with any
questions regarding your analyzer, it will be helpful to have this information
readily available. You can also obtain the firmware revision and serial
number by pressing System, More, Show System.