Filter
Top Products
Rear Components
Figure 3-2 Rear Components
Component Function
1 AC Power Connector Connects the AC power cord to the monitor.
2 VGA Connector Connects the VGA cable to the monitor.
Connecting the Cables
1. Place the monitor in a convenient, well-ventilated location near the computer.
NOTE: You can route the cables through the cable management feature on the back of the
monitor's stand, if desired.
2. Connect one end of the VGA signal cable to the VGA connector on the monitor and connect the
other end of the cable to the VGA connector on the computer.
3. Connect one end of the power cable to the AC power connector on the monitor and connect the
other end of the cable to an electrical wall outlet.
Figure 3-3 Connecting the Cables
6 Chapter 3 Setting Up the Monitor