Filter
Top Products
Card reader board
Description Spare part number
Card reader board for use in HP EliteBook 840/HP ZBook 14 models 730955-001
Card reader board for use in HP EliteBook 850 models 730821-001
Before removing the card reader board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the following components:
a. Service cover (see
Service cover on page 48)
b. Battery (see
Battery on page 50)
c. Fan (see
Fan on page 77)
d. Keyboard (see
Keyboard on page 62)
e. Base enclosure (see
Base enclosure on page 71)
Remove the card reader board:
1. Disconnect the larger card reader cable (1) and the smaller touchpad cable (2) from the the card
reader board.
2. Using a thin tool, pry up the left side of the board to disengage it from the top cover (3).
78 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts