HP (Hewlett-Packard) G4 Laptop User Manual


 
4. Remove the battery (see Battery on page 31).
5. Remove the service door (see
Service door on page 32).
6. Remove the optical drive (see
Optical drive on page 33).
7. Remove the hard drive (see
Hard drive on page 36).
8. Remove the keyboard (see
Keyboard on page 43).
9. Remove the top cover (see
Top cover on page 46).
10. Remove the system board (see
System board on page 65).
11. Remove the heat sink (see
Fan and heat sink on page 68).
Remove the processor:
1. Use a flat-bladed screw driver (1) to turn the processor locking screw one-half turn
counterclockwise, until you hear a click.
2. Lift the processor (2) straight up, and remove it.
NOTE: The gold triangle on the processor (3) must be aligned with the triangle icon embossed
on the processor socket when you install the processor.
Reverse this procedure to install the processor.
Component replacement procedures 73