Filter
Top Products
PCI 2-channel Ultra3 (LVD) SCSI adapter, 64-bit/66-MHz (uses one PCI slot);
includes internal 68-pin HD and external 68-pin VHDCI connectors; requires 3X-
BC56J-xx cable to connect adapter to DS-SL13R-Bx/ DS-SSL14-xx Ultra3 shelf.
NOTE:
NOTE: NOTE:
NOTE:
OpenVMS 7.2-2, or later, is required; Tru64 UNIX 5.1B PK4, or later
is required, maximum cable length is 12 meters.
4 4 4 4 4 4
3X-KZPEA-DB
68-pin VHDCI male-to-VHDCI male UltraSCSI cable;
xx=02, 03, 04, for 6, 12, and 24 meters respectively
3X-BC56J-xx
PCI 1-port Ultra2 (LVD) SCSI adapter, 32-bit, single-channel (uses one PCI slot);
includes external 68-pin HD connectors; requires BN38C-xx cable to connect
adapter to Ultra2 or Ultra3 shelf; HSZxx RAID controllers not supported.
8 8 8 8 8 8
3X-KZPCA-AA
68-pin HD male-to-VHDCI male UltraSCSI cable; xx=02, 03, 05, 10, 20
meters
BN38C-xx
PCI 1-channel Ultra2 (LVD) SCSI RAID controller**, 16-MB cache, (uses one
PCI slot); supports 14 disks per channel with DS-SL13R-xx Ultra3 shelves;
requires BN37A-xx cable to connect adapter to DS-SL13R-xx Ultra3 shelf.
8 8 8
- - -
DS-KZPCC-AC
PCI 3-channel Ultra2 (LVD) SCSI RAID controller**, 64-MB cache, (uses one
PCI slot); supports 14 disks per channel with DS-SL13R-xx Ultra3 shelves;
requires BN37A-xx cable to connect adapter to DS-SL13R-xx Ultra3 shelf.
8 8 8
- - -
DS-KZPCC-CE
68-pin VHDCI male-to-VHDCI male UltraSCSI cable;
xx=02, 03, 05, 10, 20 meters
BN37A-xx
NOTE:
NOTE: NOTE:
NOTE:
** = Requires a Graphics Adapter or Graphical Display Station for its configuration utility (other than the base system console.)
NOTES
NOTESNOTES
NOTES
:
Use 2-meter cable to connect adapters, controllers, and shelves within the GS320 power cabinet.
Use 10-meter cable to connect adapters, controllers to shelves in attached H9A20 expander cabinets.
Use 10- to 25-meter cables to connect adapters, controllers to shelves in remote expander cabinets.
HVD to LVD Converters
HVD to LVD ConvertersHVD to LVD Converters
HVD to LVD Converters
HVD (High Voltage Differential) adapters and LVD (Low Voltage Differential) devices are normally
incompatible due to their different signaling voltage levels. This incompatibility does not allow direct
communication between the different technologies. The HVD to LVD converter allows connectivity
between legacy HVD Host Bus Adapters and today's LVD devices. The converter provides:
Connectivity in direct attach or shared configurations of all currently available LVD devices,
including disks, tapes, libraries, and shelves (4314 or 4354) when used with the KZPBA-CB
and 3X-KZPBA-CC HVD adapters. With the retirement of StorageWorks 1 disks and HVD
shelves (BA36R), converters are desirable where upgrades to LVD HBAs, or upgrades to
current operating system versions are not possible.
Shared and direct attach configurations are interconnected much the same as those previously
configured with homogeneous HVD solutions, except that the HVD output is now passed
through the converter before proceeding to the LVD device. Where required, Y cables
(BN21W-0B), terminators (H879-AA), cables (BN38C-10, BN37A-20), one or two HVD/LVD
converters (one-port, two-port), Memory Channel adapters (CCMAB), one Memory Channel
cable
(BN39B-10), are used in conjunction with the LVD device of choice.
HVD to LVD one-port converter
HVD to LVD two-port converter
QuickSpecs
HP AlphaServer GS320 (1224 MHz)
Options
DA - 11424 North America — Version 7 — August 19, 2003
Page 15