Filter
Top Products
Display assembly
NOTE: The display assembly spare part kit includes the display panel cable, 3 WLAN antenna and
cables, and 2 WWAN antenna and cables.
Description Spare part number
43.9 cm (17.3 in), FHD AG RGB LED UVWA Dream Color with webcam (not available with HP
Mobile Broadband)
652519-001
43.9 cm (17.3 in), FHD AG RGB LED UVWA Dream Color without webcam (not available with HP
Mobile Broadband)
652518-001
Display Hinge Kit 652528-001
Display hinge covers 652529-001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 45).
5. Remove the service access cover (see
Service access cover on page 46).
6. Remove the optical drive (see
Optical drive on page 58) or upgrade bay hard drive (see Upgrade
bay hard drive on page 60).
7. Remove the keyboard (see
Keyboard on page 65).
8. Remove the top cover (see
Top cover on page 81).
9. Remove the display bezel (see
Display bezel on page 77).
Remove the display assembly:
1. Position the computer right side up with the display open and the front toward you.
Component replacement procedures 85