Filter
Top Products
Application Programs
This chapter contains several example programs to help you develop
programs for your specific measurement application. Chapter 5,
“Remote Interface Reference,” starting on page 179, lists the syntax for
the
SCPI (Standard Commands for Programmable Instruments)
commands available to program the HP 34970A.
The examples in this chapter have been tested on a
PC running on
Windows 95. The examples are written for use over the HP-IB interface
and require a
VISA (Virtual Instrument Software Architecture) library
for use with your HP-IB interface card in your
PC. You will want to
make sure that you have the
visa32.dll file in your c:\windows\system
directory for the examples to work properly.
Note: The HP-IB (IEEE-488) address is set to “09” when the instrument
is shipped from the factory. The examples in this chapter assume an
HP-IB address of 09.
320