Filter
Top Products
Appendix B
Error Messages
This appendix contains a list of messages and errors that are related to interface operations. The messages
and errors are grouped into printer, mass storage, and general interface control categories. Errors in the
interface control category may occur during printer or mass storage operations. (Refer to the owner's
handbook for your calculator for a list of all standard errors and messages.)
Note: For most error conditions, the function being attempted is not performed. However, for
those conditions and functions indicated by ∗ below, the operation may be partially performed.
Printer Operations
Display Function Meaning
ALPHA DATA -all- ALPHA characters are in a register where a number is
required—either a stack register or a data storage register.
DATA ERROR
ACCHR
ACCOL
|x| 128.
BLDSPEC
PRAXIS
YMAX YMIN, AXIS > YMAX, AXIS < YMIN, or
|nnn| > 168.
∗
PRAXIS
XMAX XMIN, YMAX YMIN, AXIS > YMAX, or
AXIS < YMIN
PRREGX
|x| > 999.
REGPLOT
STKPLOT
SKPCHR
|x| 24.
SKPCOL
|x| 128.
NO PRINTER -all- A standard printer-type device is not in the interface loop.
(Occurs in Auto mode only.)
NONEXISTENT -all- Print Function Switch set to DISABLE. Set switch to
ENABLE.
PRP
∗
PRPLOT
∗
PRPLOTP
∗
PRREG
Specified registers exceed highest numbered data storage
register. Check
bbb.eee
format in X.
PRINTER ERR ∗ -all- The printer is out of paper, jammed, or requires service.
Reload paper (if required) or turn printer off and on, then
check whether error recurs.
PRIVATE -all- An attempt was made to list, trace, edit, or view a private
program.
65
}
}
YMAX YMIN, nnn =0 or |nnn| > 168.
}
Specified program or function program does not
exist. Check program name