HP (Hewlett-Packard) HP D2842W Personal Computer User Manual


 
English 11
HP 19” Color Monitor User’s Guide
Using Your Monitor
Adjusting the Advanced Options
1 Select and press to enter the
MISCELLANEOUS
sub-menu.
2 Select the feature you require using the and adjustment controls,
then press to confirm your selection.
The following table indicates the options available.
3 Press to exit.
1. Contains record of any adjustments that the user makes in the main menu system.
2. Standard configurations pre-loaded at the factory.
Adjustment Menu
Item
Use To Action
DEGAUSS (Refer to “Improving the Image Quality“ on page 8)
INFORMATION Obtain information on video
resolutions and refresh rates
supported by your monitor.
Press for information on User Settings.
1
Press for information on Preset
Settings
2
.
VIDEO LEVEL Set Video Solution to 0.7V or
1.0V.(For all HP computers
select 0.7V)
Select the Video Level using the and
adjustment controls.
DDC Enable or disable Plug and
Play capability (Refer to
Setting the Amount of
Displayed Information, on
page 12”).
Select ON or OFF using the and
adjustment controls.
ETC
MISCELLANEOUS
80.2kHz/75Hz
ENTER:
SEL:
ETC
OSD
ETC
DEGAUSS
91.1kHz/85Hz
ENTER:
SEL:
i
DDC
i
andros.bk : andr-us.fb4 Page 11 Monday, December 21, 1998 3:51 PM