Filter
Top Products
If your printer is connected to a network
1. Open the printer's embedded Web server (EWS).
2. Click the Bluetooth tab.
3. Configure the settings you want, and then click Apply.
The following table describes the Bluetooth settings:
Option
Description
Device Address The MAC address of your Bluetooth wireless printer adapter.
Note You cannot change this address.
Device Name The device name assigned to the printer so that other Bluetooth
devices can identify it.
Passkey/PIN The 4-digit number you must enter before you can print using
Bluetooth. The default passkey is 0000.
To change the Passkey
● HP Printer Utility: Click Change PIN Code, and then enter
a new 4-digit number.
● EWS: Enter a new 4-digit number.
Reset Bluetooth To reset Bluetooth to factory default settings
● HP Printer Utility: Click Reset Device Access.
● EWS: Click Yes, reset Bluetooth.
Visibility To select the printer's visibility to other Bluetooth devices
● HP Printer Utility: Select one of the following options:
– Private Mode: Only sending devices that have stored
the printer's Bluetooth device address can discover
and use the printer.
– Public Mode: Any Bluetooth device within range can
discover and use the printer.
● EWS: Select one of the following options:
– Visible to All: Any Bluetooth device within range can
print to the printer.
– Not Visible: Only Bluetooth devices that have stored
the device address of the printer can print to it.
Security Level To set the level of security
● HP Printer Utility: Select the Encryption Required check
box to require a passkey from a Bluetooth device within
User's guide 55