Filter
Top Products
7
To Set Up the Interface Pod
Common system connections and test connections are
• non-intrusive system connection—T-piece and passive test
connections
• intrusive system connection—network element, remote loopback, and
in-line test connections
• diagnostic system connection—transmit loopback and external
loopback test connections
See the HP E5200A Broadband Service Analyzer User’s Guide or the
User Online Help for details about these system connections.
The analyzer automatically sets the interface pod transmit and receive
parameters and configures according to the signal it receives from the
interface pod. See “Automatic Configuration Parameters” on page 8 for
more details.
If you “hot swap” the interface pod while you are logged in to the analyzer,
the screen displays the message
Auto configuring, please wait...
Automatically configuring physical interfaces and
protocols according to the monitored signal.
Receive (Rx)
Receive (Rx)
Transmit (Tx)