Filter
Top Products
INSTALLATION
Printer Panel Settings
Papertype Assignments
By default, each paper tray has assigned the paper type PLAIN. In case of a paper out in a selected tray, the
printer automatically will pull paper from another tray.
The assigning of a different paper type to each tray inhibits the automatic switching of the printer to another tray if
the selected tray runs out of paper.
To assign a paper type to an input tray, select with the menu key the PAPER HANDLING MENU and there the
specific input tray. Then assign to each tray another one of the 12 predefined paper types.
If you have several trays with the same paper, assign to each of these trays the same paper type. This will increase
your input capacity for this paper type, as the printer will automatically switch to the next tray with the same paper
type in case the selected tray runs out of paper.
Note:
PLAIN is the default paper type. In case a print job arrives without paper selection, the printer will pull
paper from the lowest tray containing PLAIN paper (e.g. printer test pages).
Software Installation
Installation of Printer Driver
The CD delivered with your TowerTray system contains the HP LaserJet PCL 5e and PCL 6 software supporting
the TowerTray option for Windows XP and 2000.
For availability of the most recent printer drivers, please consult our WEB page at: www.key2printing.com
Manual 0545 11 TowerTray
TM
for the HP LaserJet 4200 / 4300 / 4250 / 4350