Filter
Top Products
CABLING
RapidRun™ Connector Technology
–Seamless Connectivity, Maximum
Flexibility.
The secret to RapidRun’'D5s flexibility is its cutting-edge
connector technology, which creates a lossless connection
between Runner and Break-Away. A precision-machined
connector shell is cut from solid brass and plated to a
bright nickel finish. Also, to resist the effects of oxidation
and ensure years of reliable operation, the connector
terminals are gold-plated.
Runner cables are terminated with female connectors,
eliminating the risk of fatal damage to a pin. To provide
maximum installation ease, the female connectors include
a protective cap with pullingeye. While able to withstand
a maximum pulling tension of 30lbs., the split ring will
fail long before damage can be done to the delicate
termination points.
The overall connector shape also plays an important role
in RapidRun’s ease of installation. The unique geometry
of the female connector allows for it to glide through 3/4''
conduit, while the tapered rear of the connector provides
enough relief to allow the connector to pass through a
90° sweep.*
For effortless connection to the Runner, Break-Away
terminations are finished with a male connector. Just
align the red arrows to guide the connectors together
and tighten the knurled locking ring. Pin configurations
and mechanical keys allow acceptable combinations to
easily mate, while blocking incompatible Break-Away
combinations that could adversely affect signal
transmission.
Installers benefit from powerful performance advantages, including:
Uncompromised signal integrity: pin pitch and insulator material make our connector virtually transparent to the delicate
video signal, resulting in minimal signal loss.
Dirt and damage pr
otection: the pulling caps protect the delicate contacts within the connector from the dirt, dust and
damage – common on job sites.
Flexible durability: while durable enough to withstand 30lbs. of pulling tension, the connector is small enough to pull through
3/4'' conduit and even a 90° factory-manufactured sweep*.
*Sweeps bent in the field may result in a smaller diameter or “flattened” sweep.
31