Filter
Top Products
Troubleshooting
3. Double-click the UntouchTimeOut key. The Edit DWORD
Value dialog box opens.
4. Click the Decimal radio button. Value displays in decimal
(default: 10000).
5. Enter the delay time in milliseconds, 60000 is 60 seconds
6. Exit regedit when done.
7. Shut Down and restart the machine. A restart is required
before the setting will take effect.
■ A cursor is not visible. To make the cursor visible, first, open
Control Panel > Elo Touchscreen > Mode tab. Check if the
Hide arrow mouse pointer box is checked; if yes, un-check it
and click OK. If a mouse is not installed on the computer,
Shut Down the computer, install a mouse, then restart the
computer. The cursor should now be visible. You may then
Shut Down and remove the mouse, or leave it connected, as
desired.
■ If connecting multiple monitor systems, all monitors must be
configured to have independent resolution control (as in two
monitors, each at 1024 x 786 resolution), rather than a single,
large desktop (as in 2048 x 768). Multiple individual video
cards are automatically set up as individual monitors. Some
multiport video cards can be configured either way; in this
case, the video driver must be set up properly. Once the
multiport video has been properly configured, the Elo
Universal driver should be removed and reinstalled. Some
multiport video cards can only be configured as a single large
desktop, and they will not work with Elo's multiple monitor
driver setup.
A–6 User Guide