Filter
Top Products
EN
Internal assemblies
119
Pressure roller
1
Remove all covers, the RFI shield, the printer door, the exit roller,
the delivery assembly, the fuser pressure plate, the front casing,
and the heating element.
2
Remove the pressure roller guide by lifting the edge (callout 1)
and then rolling it gently backward (callout 2).
Figure 47. Pressure roller guide removal
3
Lift the right end of the pressure roller up and out of the printer
chassis.
Note
The right end of the pressure roller is greased.
4
The left side will follow easily with the pressure roller gear still
attached.
Note
When reinstalling the pressure roller, apply a drop of pressure roller
grease to the grounding plate on the right end of the shaft. See Chapter
7, “Parts and diagrams,” for information about ordering pressure roller
grease.
2
2
2
1
www.GovTechMedia.com