Filter
Top Products
Print product reports
Product reports reside within the product memory. These pages help diagnose and solve problems with
the product.
NOTE: If the product language was not correctly set during installation, you can set the language
manually so the information pages print in one of the supported languages. Change the language by
using the System Setup menu on the control panel or the embedded Web server.
From the Reports menu, you can print several informative pages about the product.
Menu item Description
Demo Page Prints a page that demonstrates print quality
Menu Structure Prints a map of the control panel-menu layout. The active settings for each menu are
listed.
Configuration Report Prints a list of all the product settings. Includes network information when the
product is connected to a network.
Supplies Status Prints the status for each toner cartridge, including the following information:
●
Estimated percentage of cartridge life remaining
●
Approximate pages remaining
●
Part number for HP toner cartridge
●
Number of pages printed
●
Information about ordering new HP toner cartridges and recycling used HP
toner cartridges
Network Summary Prints a list of all product network settings (all models except HP LaserJet Pro 400
M401a Printer and HP LaserJet Pro 400 M401d Printer)
Usage Page Prints a page that lists PCL pages, PCL 6 pages, PS pages, pages that were jammed
or mispicked in the product, monochrome (black and white) or color pages; and
reports the page count
PCL Font List Prints a list of all the PCL fonts that are installed
PS Font List Prints a list of all the PostScript (PS) fonts that are installed
PCL6 Font List Prints a list of all the PCL6 fonts that are installed
Service Page Prints the service report
Print product reports from an LCD control panel
1. On the product control panel, press the OK button to open the menus.
2. Open the Reports menu.
3. Select the report you want to print, and then press the OK button to print the report.
8 Chapter 1 Product introduction ENWW