Filter
Top Products
System Unit
Dimensions
(HxWxD)
17.0 x 7-7/8 x 22 in (43.0 x 20.0 x 55.0 cm)
Weight
(approximate)
37 lb (16.8 kg)
Input Requirements
(per power supply)
Range Line Voltage
100-127V and 200-240V
Normal Line Voltage
115 to 230 VAC
Line Frequency
50 to 60 Hz
Rated Input Current
< 6A RMS at 90VAC with maximum load
BTU Rating
1,560 BTU
SCSI Connectors
(SCSI Models only)
One internal HD68 connectors
NOTE:
Support for either one internal or one external SCSI channel is
available. To use the channel for external connection, order an internal-
to-external SCSI cable option kit (PN 159547-B22 or 333370-B21).
Power Supply Output
Power
Rated Steady-State
Power
350W
Maximum Peak Power
370W
Temperature Range
Operating
50° to 93° F (10° to 35° C)
Shipping
-40° to 150° F (-40° to 66° C)
Relative Humidity
(non-condensing)
Operating
20% to 80%
Non-operating
5% to 90%
Acoustic Noise
Idle
(Fixed Disk Drives
Spinning)
L
WAd (BELS)
5.7
L
pAm (dBA)
40
Operating
(Random Seeks to Fixed
Disks)
L
WAd (BELS)
5.7
L
pAm (dBA)
40
48X Max IDE (ATAPI)
CD-ROM Drive
Disk
Applicable Disk
CD-ROM, CD-XA, CD-DA (Mode 1, Mode 2,
Form 1 and 2)
Photo CD (Single and Multi-session)
Mixed Mode (Audio and Data combined)
CD-R
Capacity
540 MB (Mode 1, 12 cm)
650 MB (Mode 2, 12 cm)
Block Size
Mode 1
2,048 bytes
Mode 2
2,340 bytes, 2,336 bytes
CD-DA
2,352 bytes
CD-XA
2,328 bytes
Interface
IDE (ATAPI)
Access Times
(typical)
Random
<100 ms
Full-Stroke
<150 ms
Data Transfer Rate
Sustained
3000 to 7200 KB/s (20X to 48X)
Burst
150 KBps to 7,200 KBps
Bus Rate
16.7 MBps
Cache Buffer
128 KB
QuickSpecs
HP ProLiant ML310 Generation 3
Technical Specifications
DA - 12364 Worldwide QuickSpecs — Version 21 — 2-16-2007
Page 27