Filter
Top Products
One Quad-Core/Dual Core Intel® Xeon® W3500 processors
Intel® 5500 chipset
Memory
:
18 DIMM slots
Up to 192GB, using PC3-8500R DDR3 Registered (RDIMM) memory, operating at 800MHz when fully
populated at 3 DIMMs per Channel in 18 slots.
Up to 48GB, using PC3-10600E DDR3 Unbuffered (UDIMM) memory, operating at 1066MHz when fully
populated at 2 DIMMs per Channel in 12 slots.
NOTE:
If only one processor is installed, only half the DIMM slots are available
Storage Controllers
:
Entry Models: Non hot plug model with embedded HP Smart Array B110i SATA RAID Controller (RAID 0/1/1+0)
o Base Models: Hot plug SAS/SATA model (SAS model integrated HP Smart Array P410/Zero memory SAS
Controller (RAID 0/1/1+0)
Performance Models: Hot plug SATA model integrated HP Smart Array B110i SATA RAID controller hot plug
advanced key
Available upgrades: 256MB, 512MB/1G with write back, Battery kit upgrade (for FB/BBWC), and Smart Array
Advanced Pack (SAAP)
Internal Drive Support
:
Up to eight (8) LFF (3.5") Hot Plug or four (4) Non Hot Plug Serial Attached SCSI (SAS) or Serial-ATA (SATA)
hard drives
Maximum of 16TB of internal storage capacity
Network Controller
:
Embedded NC326i PCI Express Dual Port Gigabit Server Adapter
Expansion Slots
:
Four total expansion slots
One (1) PCI-Express x8 Gen1 (x1 speed); One (1) PCI-Express x16 Gen2 (x16 speed); Two (2) PCI-Express x8
Gen2 (x4 speed)
Optional PCI-X Expander provides additional two (2) 64-bit/100-MHz PCI-X slots by using a single PCI Express
slot (only on slot 5)
Ports
:
USB 2.0 support
Eight total ports: (2) front; (4) rear; (2) internal (1 for Tape)
1 internal Secure Digital (SD) slot
Power Supply
:
One 460 W Non-Hot Plug, Non-redundant Power Supply
Optional 750W Hot Plug redundant power supply
NOTE:
The 750W power supply requires RPS Enablement kit.
Redundancy
:
Optional Hot plug redundant power supply
Optional for optional redundant fan
Infrastructure Management
:
HP Integrated Lights-Out 2 (iLO 2) management processor for simplified server setup, health monitoring and
recovery, power and thermal control, and lights-out remote administration.
HP Insight Control a product option, delivers essential infrastructure management that can help save time and
money by making it easy to deploy, migrate, monitor, control and optimize your IT infrastructure through a
single, simple management console. Insight Control supports both Windows and Linux-based central
management servers.
HP Insight Dynamics for ProLiant, a product option, is an integrated command center that enables IT Staff
personnel to continuously analyze and optimize a converged infrastructure, while automating and reducing the
cost of common data center tasks by as much as 40 percent. This ultimately enables them to dynamically keep
pace with the organization's changing business requirements.
Deployment/Serviceability
:
Easy chassis entry and component access
Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow
for greater flexibility in performing defective parts replacement
HP Smart Start Tool
Operating Systems and Virtualization Software Support for ProLiant Servers
:
Supports Windows, RHEL, SLES, OEL, VMware, and HP Citrix Essentials for XenServer
QuickSpecs
HP ProLiant ML330 Generation 6
Overview
DA - 13361 Worldwide QuickSpecs — Version 17 — 3-31-2010
Page 2