Filter
Top Products
System Unit
Tower Dimensions
(H x W x D)
(W/O foot stand)
7.87 x 16.81 x 24.13 in (200 x 427 x 613 mm)
Tower Weight
(approximate)
Maximum:
(All hard drives, power
supplies and processors
installed)
30 kg
Minimum:
(One hard drive, power
supply and processor
installed)
16 Kg
Input Requirements
(per power supply)
Rated Line Voltage
100 to 240 VAC
Rated Input Current
7.1 Amps (at 120VAC) to 3.5 Amps (at 240
VAC)
Rated Input Frequency
50 to 60 Hz
Rated Input Power
852 W
BTU Rating
Maximum
460W - 1773 BTU / hr (at 120 VAC), 1715 (at
240 VAC)
750W - 2892 BTU / hr (at 120 VAC), 2797 (at
240 VAC)
1200W - 3530 BTU / hr (at 120 VAC), 4600
(at 240 VAC)
Power Specifications
To review typical system power ratings use the Power Calculator which
is available via the online tool located at URL:
www.hp.com/go/proliant-
energy-efficient
or
www.hp.com/go/hppoweradvisor
- Click on the system of interest. Example: ML330 G6
- Follow the instructions of the next screens.
Power Supply Output
(per power supply)
Rated Steady-State
Power
460 (750) W (at 100 VAC),
460 (750) W (at 200 VAC)
Maximum Peak Power
460 (750) W (at 100 VAC),
460 (750) W (at 200 VAC)
NOTE:
See Power Supply Specifications
tables for complete details on 460W PSU and
optional 750W.
System Inlet
Temperature
Operating
50° to 95° F (10° to 35° C) at sea level with an
altitude derating of 1.8°F per 1,000 ft (1.0° C
per every 305 m) above seal level to a
maximum of 10,000 ft (3050 m) no direct
sustained sunlight . Maximum rate of change
is 18°F/hr (10°C/hr). The upper limit may be
limited by the type and number of options
installed. System performance may be
reduced if operating with a fan fault or above
86°F (30°C).
Non-Operating
-22° to 140° F (-30° to 60° C)
Relative Humidity
(non-condensing)
Operating
10% to 90% relative humidity (Rh), 82.4°F
(28°C) maximum wet bulb temperature, non-
condensing.
Non-operating
**
10% to 95% relative humidity (Rh), 101.7°F
(38.7°C) maximum wet bulb temperature,
non-condensing.
QuickSpecs
HP ProLiant ML330 Generation 6
Technical Specifications
DA - 13361 Worldwide QuickSpecs — Version 17 — 3-31-2010
Page 41