Filter
Top Products
Data Transfer Rate
Sustained
150 KB/s (single), 1,500 to 7,200 KBps
(10x to 48x)
Burst
150 KB/s to 7,200 KB/s
Cache Buffer
128 KB
Start-up Time
(typical)
<7seconds
Stop Time
<4seconds
Laser Parameters
Type
Semiconductor Laser GaA1As
Wave Length
780 ± 25 nm
Operating Conditions
Temperature
41° to 113° F (5° to 45° C)
Humidity
10% to 80%
Dimensions
(HxWxD, maximum)
1.7 x 5.85 x 8.11 in (42.9 x 150 x 208 cm)
Weight
2.09 lb (0.95 kg)
NC7760 PCI Gigabit
Server Adapter
(embedded)
Network Interface
10Base-T/100Base-TX/1000Base-TX
Compatibility
IEEE 802.3 10Base-T
IEEE 802.3ab 1000Base-T
IEEE 802.3u 100Base-TX
Data Transfer Method
32-bit bus-master PCI
Network Transfer Rate
10Base-T (Half-Duplex)
10 Mb/s
10Base-T (Full-Duplex)
20 Mb/s
100Base-TX (Half-
Duplex)
100 Mb/s
1000Base-TX (Half and
Full-Duplex)
2000Mb/s
Connector
RJ-45
Cable Support
10Base-T
Categories 3, 4 or 5 UTP; up to 328 ft (100 m)
10/100/1000Base-TX
Category 5 UTP; up to 328 ft (100 m)
Integrated Single
Channel Wide Ultra3
SCSI Adapter in PCI
Slot 1
Drives Supported
Up to 14 SCSI devices Wide Ultra320, Wide Ultra3 and Wide Ultra2
SCSI hard drives
Data Transfer Method
64-bit/33-MHz PCI bus-master
SCSI Channel Transfer
Rate
160 MB/s per channel
Maximum Transfer
Rate per PCI Bus
(peak)
267 MB/s per channel
SCSI Protocols
Wide Ultra 3 SCSI and Wide Ultra2 SCSI
Electrical Protocol
Low Voltage Differential (LVD)
SCSI Termination
Active Termination
External SCSI
Connectors
External SCSI cabling from the integrated SCSI controller is achieved
using an internal to external SCSI cable option kit (PN 159547-B22 or
333370-B21).
Internal SCSI
Connectors
One 68-Pin Wide Ultra SCSI-3 connectors
QuickSpecs
HP ProLiant ML330 Generation 3
Technical Specifications
DA - 11614 Worldwide QuickSpecs — Version 44 — 6.28.2005
Page 33