Filter
Top Products
NOTE:
Memory configurations listed do not apply to "Factory Integrated Models".
HP ProLiant ML350 G5 Memory Configuration
The HP ProLiant ML350 G5 requires memory interleaving when more than one DIMM is installed. For interleaving, DIMMs
must be configured in identical pairs. The system will not boot properly if multiple DIMMs of varying density or type are
installed in the system.
Standard Memory
All HP ProLiant ML350 G5 models ship with PC2-5300 Fully Buffered DIMMs (DDR2-667).
Entry models include a single 512 MB DIMM (Dual-Core) or two 512MB DIMMs (Quad-Core).
Base models include two 512 MB DIMMs (1 GB total memory).
Factory Integrated Models include the memory capacity of your choice.
Common Memory Configuration
Valid DIMM pair combinations use slots 1/5, slots 2/6, slots 3/7, and slots 4/8. Maximum supported memory is 16 GB for
Dual-Core and 32 GB on Quad-Core models.
NOTE:
Charts does not represent all possible memory configurations.
Memory
Slot
1A 2B 3C 4D 5A 6B 7C 8D
Standard
1 GB 512 MB
Empty Empty Empty
512 MB
Empty Empty Empty
Optional
13 GB
512 MB 2 GB 2 GB 2 GB 512 MB 2 GB 2 GB 2 GB
Maximum
32 GB
4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB
Following are memory options available from HP:
512MB FBD PC2-5300 1 x 512 MB Kit
413507-B21
1 GB FBD PC2-5300 2 x 512 MB Kit
397409-B21
2 GB FBD PC2-5300 2 x 1 GB Kit
397411-B21
2 GB FBD PC2-5300 2 x 1 GB LP Kit
461826-B21
4 GB FBD PC2-5300 2 x 2 GB Kit
397413-B21
4 GB FBD PC2-5300 2 x 2 GB LP Kit
461828-B21
8 GB FBD PC2-5300 2 x 4 GB Kit
397415-B21
Online spare memory configuration
FBDIMMs can either be single-rank or dual-rank. Certain FBDIMM configuration requirements are based on these
classifications. A dual-rank FBDIMM is similar to having two separate FBDIMMs, or ranks, on the same module. Although
only a single FBDIMM module, a dual-rank FBDIMM acts as two separate FBDIMMs.
In online spare mode, a single rank of memory acts as the spare memory. For single-rank FBDIMMs, the entire FBDIMM
acts as the spare memory. For a dual-rank FBDIMM, only half of the FBDIMM acts as the spare memory while the other half
is available for operating system and application usage.
Online spare FBDIMM configuration requirements (in addition to general configuration requirements):
When only bank A is being used, it must be fully populated with dual-rank FBDIMMs.
For optimum memory usage, HP recommends all FBDIMMs be the same size with the same HP part number. If
different sized FBDIMMs are used, a portion of the installed memory may not be utilized.
In online spare mode, FBDIMMs must be populated as specified in the following table:
Configuration 1 (Bank A only) is only supported if using bank A, populated with dual-rank FBDIMMs.
After installing FBDIMMs, use RBSU to configure the system for online spare memory support.
Bank A
1A and 5A
Bank B
2B and 6B
Bank C
3C and 7C
Bank D
4D and 8D
QuickSpecs
HP ProLiant ML350 Generation 5
Memory
DA - 12475 Worldwide QuickSpecs — Version 20 — 11/27/2007
Page 34