Security
Power-on password
Setup password
Diskette boot control
Parallel and serial interface control
Disk configuration lock
Power switch security
Server Power Cords
ProLiant ML servers in a rack-mount configuration no longer ship standard with NEMA power
cords that allow connection to 110V US wall outlets in a home or office. These servers are
primarily connected to PDU's in data center racks so they now ship standard with only a PDU
power cord (416151-B21). If a user wishes to power a ProLiant ML rack-mount server using a
110V receptacle (NEMA-15), the NEMA power cord must be ordered separately. The 12' cord
(AF556A) or 6' cord (187335-001) can be purchased online at HP.COM. In a tower configuration,
the servers ship standard with a 6' country specific NEMA power cord. If customers require a local
power cord, they can check the power cord matrix for the appropriate country specific sku. Please
see the following power cord matrix:
http://www.hp.com/go/powercordmatrix
.
UPS and PDU Power
Cord Matrix
Please see the UPS and PDU cable matrix that lists cable descriptions, requirements, and
specifications for UPS and PDU units:
http://h18004.www1.hp.com/products/servers/proliantstorage/power-protection/index.html
Power Supply
800 Watt-CE Mark Compliant Hot Plug Power Supply (1000 Watt high line)
Optional second Power Supply provides redundant capability
NOTE:
Please see the "Power Specifications" section later in this document for low line and high
line requirements.
System Fans
2 fans ship standard, dual redundant fans are optional, 4 fans total supported (does not include
power supply or processor heat sink fans)
Required Cabling
For required cabling information, refer to the HP ProLiant ML350 G5 cabling matrix at
http://www.hp.com/servers/proliantML350
.
NOTE:
Please see the "Storage" section of this QuickSpecs for important information on
controllers and cables required to support SAS or SATA hard drives as well as storage
management software available for SATA hard drives.
QuickSpecs
HP ProLiant ML350 Generation 5
Standard Features
DA - 12475 Worldwide QuickSpecs — Version 20 — 11/27/2007
Page 9