HP (Hewlett-Packard) mp2220 Projector User Manual


 
Setting up the projector 15
Connecting power
1. Place the projector on a stable platform located 1.5 to 10 m (5 to 33 ft) in front of the
screen. Ideally, the platform should be lower than the bottom of the screen.
2. Connect one end of the power cord to the back of the projector
1 and the other end to a
grounded electrical outlet
2.
If you want to permanently install the projector on a table or behind the screen, see “Installing
the projector” on page 47.
Downloaded from www.Manualslib.com manuals search engine