![](http://pdfasset.owneriq.net/f/c6/fc6c894c-9e8f-4f7d-a6b2-a1155268122d/fc6c894c-9e8f-4f7d-a6b2-a1155268122d-bg72.png)
Caution
Do not spin the fan blades with your finger or you could damage the fan’s bearings.
Reassembly Notes
• If the thermal pad is damaged, use a sharp knife or scraper to carefully remove it from the heat
sink, then attach a new thermal pad.
• Install the heat sink screws in this order:
1. Install all four screws lightly.
2. Fully tighten the screws in the order stamped on the heat sink.
Service Manual Removal and Replacement 2-43