![](http://pdfasset.owneriq.net/2/30/230aba07-6bfb-40e7-aac9-2bb38b27862e/230aba07-6bfb-40e7-aac9-2bb38b27862e-bg80.png)
Removal and Replacement Procedures
Maintenance and Service Guide 5–45
8. Flex the right side of the base enclosure near the audio
jacks
1 until the jacks clear the base enclosure.
9. Lift the rear edge of the system board and swing it up 2
until
the board rests at a 45-degree angle.
10. Slide the system board away from the base enclosure at an
angle 3.
Removing the System Board
Reverse the above procedure to install the system board.