Filter
Top Products
Information and Support panel
• Supplies Status: Shows the information about currently installed printheads and
ink cartridges.
• Supply Info: Shows the ink cartridge replacement options.
• Device Information: Displays information about the model and serial number.
Also allows you to print the self-test diagnostic page of the device. This page
contains information about the device and the supplies. For more information, see
Understand the self-test diagnostic page.
• Print Quality Diagnostics: Allows you to diagnose issues affecting the print
quality of the device. For more information, see
To print the print quality diagnostic
page.
• Clean: Guides you through cleaning the printheads. For more information, see
To
clean the printheads.
• Align: Guides you through aligning the printheads. For more information, see
To
align the printheads.
• Calibrate Linefeed: Allows you to perform linefeed calibration. For more
information, see
To calibrate the linefeed.
• Control Panel Language: Allows you to set the language used to print reports
such as the self-test diagnostic page.
• HP Support: Gain access to HP Web site where you can find support for the
device, register the device, and find information about returning and recycling used
printing supplies.
Printer Settings panel
• Trays Configuration: Set the default media type and size for a tray, and set the
tray priority. For more information, see
Configure trays.
• Additional Settings: Launch the embedded Web server to change network
settings. Configure IP settings for network connectivity.
Network Printer Setup Utility (Mac OS)
This tool allows you to configure network settings for the device. You can configure
wireless settings such as network location name and wireless mode, and wired
settings such as TCP/IP address, router, and subnet mask.
To open the Network Printer Setup Utility
1. From the Finder, select Computer from the Go menu.
2. Select Library, and then select Printers.
3. Select hp, select Utilities, and then select Network Printer Setup Utility.
4. Follow the onscreen instructions to configure network settings for the device.
HP Web Jetadmin software
The HP Web Jetadmin software is a Web-based management solution for remotely
installing, configuring (both individually or in batch mode), monitoring status (including
levels for supplies), conducting remote diagnostics, and troubleshooting a wide variety
of HP and non-HP network peripherals.
Use device management tools 33