Filter
Top Products
individually.
Description
DescriptionDescription
Description
Product Number
Product NumberProduct Number
Product Number
PA-8800 processor assembly (contains 4 CPUs and occupies 2 sockets)
A6888A
PA-8800 processor assembly (contains 2 CPUs and occupies 1 socket)
NOTE:
NOTE:NOTE:
NOTE:
Requires terminator AB480A if only a single socket is occupied.
AB522A
Instant Capacity right-to-access PA-8800 processor assembly (contains 4 CPUs and occupies 2
sockets)
A6886A
Instant Capacity right-to-access PA-8800 processor assembly (contains 2 CPUs and occupies 1
socket)
NOTE:
NOTE: NOTE:
NOTE:
Requires terminator AB480A if only a single socket is occupied.
Instant Capacity Enable right-to-use PA-8800 processor
AB521A
NOTE:
NOTE:NOTE:
NOTE:
When ordering active sx1000 cell boards, Instant Capacity and non-Instant Capacity processors and non-Instant
Capacity memory can be ordered. But when ordering Instant Capacity sx1000 cell boards, only Instant Capacity processors
and Instant Capacity memory can be ordered.
Cell Board COD
Cell Board CODCell Board COD
Cell Board COD
With cell board COD, Superdome PA-8800 servers can be populated with PA-8800 cell boards (CPU and memory) and it is
no longer necessary to pay for the additional cell boards (CPU and memory) until the customer uses them. Additional CPUs
and cell boards can be activated instantly with a simple command providing immediate increases in processing power and
memory capacity to accommodate application traffic demands.
In the unlikely event that a cell board fails, the HP system will replace the cell board at no additional charge. The COD cell
board brings the system back to full performance and capacity levels, reducing downtime and ensuring no degradation in
performance.
Please note the following when when ordering Instant Capacity sx1000 cell boards:
only Instant Capacity processors and Instant Capacity memory can be ordered.
the maximum memory needed must be ordered because it is not possible to purchase additional Instant Capacity
memory without ordering the Instant Capacity Cell Board upgrade product, A9913A.
When additional capacity is required, additional cell boards can be brought online. The COD cell boards are each
activated with a single command.
Cell board Capacity on Demand (COD) can be ordered pre installed on Superdome servers.
Below are the relevant product numbers of cell board Instant Capacity
Description
DescriptionDescription
Description
Product Number
Product NumberProduct Number
Product Number
Instant Capacity cell board for PA-8800 (no CPU/memory included)
- Factory integration
- Field add-on
A9743A
A9913A
Instant Capacity PA-8800 cell board enablement
NOTE:
NOTE:NOTE:
NOTE:
When activating the Instant Capacity cell board, you must activate a minimum of 2
Instant Capacity processors and ALL Instant Capacity memory.
A9747A option 02A
Instant Capacity 2-GB memory
A9744A
Instant Capacity 2-GB memory enablement
A9748A option 02A
Instant Capacity 4-GB memory
A9745A
Instant Capacity 4-GB memory enablement
A9749A option 02A
Instant Capacity 8-GB memory
A9746A
Instant Capacity 8-GB memory enablement
A9750A option 02A
Temporary Instant Capacity
Temporary Instant CapacityTemporary Instant Capacity
Temporary Instant Capacity
Temporary Instant Capacity provides the customer the flexibility to temporarily activate an Instant Capacity processor(s) for a
30 CPU day period. The program includes a temporary Operating Environment (OE) license to use and temporary
hardware/software support. The Temporary Instant Capacity program enables customers to tap into processing potential for a
fraction of the cost of a full activation, to better match expenditures with actual usage requirements and to enjoy the benefits
QuickSpecs
HP 9000 Superdome Servers
HP 9000 Superdome ServersHP 9000 Superdome Servers
HP 9000 Superdome Servers
(PA-8600, PA-8700 and PA-8800)
(PA-8600, PA-8700 and PA-8800)(PA-8600, PA-8700 and PA-8800)
(PA-8600, PA-8700 and PA-8800)
System Management Features
DA - 11721 North America — Version 13 — April 1, 2005
Page 32