Filter
Top Products
OpenView Operations Agent
OpenView Operations AgentOpenView Operations Agent
OpenView Operations Agent
-collects and correlates OS and application events (fee-based)
OpenView Performance Agent
OpenView Performance AgentOpenView Performance Agent
OpenView Performance Agent
-determines OS and application performance trends (fee-based)
OpenView GlancePlus
OpenView GlancePlusOpenView GlancePlus
OpenView GlancePlus
-shows real time OS and application availability and performance data to diagnose
problems (fee-based)
OpenView Data Protector (Omniback II)-
OpenView Data Protector (Omniback II)-OpenView Data Protector (Omniback II)-
OpenView Data Protector (Omniback II)-
backs up and recovers data (fee-based)
In addition, the Network Node Manager (NNM) management station automatically discovers, draws (maps), and monitors
networks and the systems connected to them.
All other OpenView management tools, such as OpenView Operations, Service Desk, and Service Reporter, will be able to
collect and process information from the agents running on the server.
General Site Preparation Rules
General Site Preparation RulesGeneral Site Preparation Rules
General Site Preparation Rules
AC Power Requirements
AC Power RequirementsAC Power Requirements
AC Power Requirements
The modular, N+1 power shelf assembly is called the Front End Power Subsystem (FEPS). The redundancy of the FEPS is
achieved with 6 internal Bulk Power Supplies (BPS), any five of which can support the load and performance requirements.
Input Power Options
Input Power OptionsInput Power Options
Input Power Options
PDCA Product
PDCA ProductPDCA Product
PDCA Product
Number
NumberNumber
Number
Source Type
Source TypeSource Type
Source Type
Source Voltage
Source VoltageSource Voltage
Source Voltage
(nominal)
PDCA
PDCAPDCA
PDCA
Required
RequiredRequired
Required
Input Current Per
Input Current PerInput Current Per
Input Current Per
Phase (200-240
Phase (200-240Phase (200-240
Phase (200-240
VAC
VACVAC
VAC
Power Required
Power RequiredPower Required
Power Required
A5800A
Option 006
3-phase
Voltage range 200-240 VAC,
phase-to-phase, 50/60 Hz
4-wire
44 A Maximum per
phase
2.5 meter UL power cord and OL approved
plug provided. The customer must provide the
mating in line connector or purchase quantity
one A6440A opt 401 to receive a mating in
line connector. An electrician must hardwire
the in line connector to
60 A/63 A site power.
a,b,c
A5800A
Option 007
3-phase
Voltage range 200-240 VAC,
phase-to-neutral, 50/60 Hz
5-wire
24 A Maximum per
phase
2.5 meter <HAR> power cord and VDE
approved plug provided. The customer must
provide the mating in line connector or
purchase quantity 1 A6440A opt 501 to
receive a mating in line connector. An
electrician must hardwire the in line
connector to
30 A/32 A site power.
a,b,d
a. A dedicated branch is required for each PDCA installed.
b. In the U.S.A, site power is 60 Amps; in Europe site power is 63 Amps.
c. Refer to
Option 006 and 007 Specifics Table
Option 006 and 007 Specifics TableOption 006 and 007 Specifics Table
Option 006 and 007 Specifics Table
below for detailed specifics related to this option.
d. In the U.S.A. site power is 30 Amps; in Europe site power is 32 Amps.
Console Device
Console DeviceConsole Device
Console Device
PA-800 Superdome integrates console functionality into the Support Management Station. Note that this SMS/Console is
also used on Integrity Superdome.
QuickSpecs
HP 9000 Superdome Servers
HP 9000 Superdome ServersHP 9000 Superdome Servers
HP 9000 Superdome Servers
(PA-8600, PA-8700 and PA-8800)
(PA-8600, PA-8700 and PA-8800)(PA-8600, PA-8700 and PA-8800)
(PA-8600, PA-8700 and PA-8800)
System Management Features
DA - 11721 North America — Version 13 — April 1, 2005
Page 20