Filter
Top Products
2.2 Configure Tape Devices for mvEnterprise on AIX
mvEnterprise relies on AIX to provide driver support for tape devices.
These should be configured using smit. An example to add a 4mm DAT
drive is given below.
1. At an AIX command shell, type smit. The System Management
menu displays.
NOTE: The example screens shown here are intended to be
representative of those you would see on your system. However,
due to factors such as differing hardware, your system’s screen
displays may vary from these examples.
If you can’t type in the entry, try pressing the appropriate
function key.
2. Select Devices. The Devices screen displays.
mvEnterprise Release 4.1 on AIX Installation Guide Page 43