Filter
Top Products
20
Connecting to a Novell NetWare 4.11 Server
Microsoft Windows 98 2nd edition
10 Connecting to a Novell NetWare 4.11 Server
Microsoft Windows 98
2
nd
edition
Requirements
Procedure
1
With the HP Vectra turned off, install the network adapter into a PCI slot.
2
Connect the network cable to the newly installed network adapter.
3
Power on the machine and boot to Windows 98.
4
Windows 98 will detect the network adapter as “Intel PRO/100B PCI
Adapter” during start up and install the OS embedded driver.
5
Click on “Yes” when Windows 98 prompts to restart the system.
6
After restarting the system, additional changes in the network properties,
such as: workgroup name, computer name, etc. may be necessary. Ask
your Network Administrator for more information. Restart the system if
changes are made.
7
From the location of the “Novell Client v3.1 for Windows 95/98”
installation files, execute “Setup.exe”.
8
Click on “Yes” to accept the “Novell Terms and Conditions”.
9
Select either “Typical” or “Custom” and click on “Install”. Typical
Installation is normally chosen. Select Custom Installation only if you are
an administrator or an advanced user. When prompted for options during
installation, ask your Network Administrator for more information.
10
Click on “Reboot” once the installation is complete.
Operating System
Windows 98 2
nd
edition
Driver Version
3.37.07
Driver File
E100bnt.sys
Server OS
Novell NetWare 4.11 Server
Client OS
Client v3.1 for Windows 95/98
Pro100B.book Page 20 Friday, December 10, 1999 4:02 PM